How to Disconnect Sprayer Hose From Delta Faucet? Step-by-Step Instructions

Want to disconnect sprayer hose from delta faucet by yourself? But unfortunately, you don’t know how to do it. Don’t worry; I will explain step by step tutorial in this article. Sometimes, there may be a problem with the sprayer or faucet, and the water only flows from one of them. Or the sprayer hose is leaking and needs to be replaced. Or, you may want to replace the sink and want a new type of faucet without a sprayer hose.

Honestly, it is better to solve the problem yourself than to call the plumber. If you confirm to read the entire article at least once and try to follow these steps to solve the problem, I assure you that you will be able to complete this work without any additional cost.

Equipment You Need

  1. Pliers
  2. Screwdriver
  3. Wrench

Step-by-Step Instructions to Disconnect Sprayer Hose from Delta Faucet:

Step 1: The Basics

There is a shut-off valve under the sink, and you need to close it first. To start any plumbing work, it is important to work without wires. Because electricity can pass through water, it can cause fatal harm to your health.

Step 2: Unplug the Hose

unplug the hose - disconnect sprayer hose from delta faucet

For any of these Delta faucet styles, the first thing you need to do is disconnect the sprayer hose from the outlet drain. Since this is a snap-on link, it is very simple. Please follow the steps below:

  1. Reach down under the counter and find the exit tube. Identify the sprayer hose connected to it.
  2. Check if there is a clamp that secures the sprayer hose to the outlet pipe. If it is, loosen it and set it aside safely.
  3. Place the bucket so that when the sprayer hose is disconnected, any excess water will flow to the bucket.
  4. Depending on your connection, you may need to press or pull the connection to disconnect the sprayer hose.

Step 3: Remove The Sprayer Head

Remove The Sprayer Head - disconnect sprayer hose from delta faucet

Place a bucket before disconnecting the sprayer hose. It will store the extra water that will flow. Drain the water from the sprayer hose. When disconnecting the sprayer hose, some water will drip. This is why you should prepare a bucket for holding water.

Step 4: Check The Sign of Leak

Check The Sign of Leak - disconnect sprayer hose from delta faucet

Check whether the sprayer hose is leaking and whether the sprayer head is corroded. If a leak occurs, you will need to repair the sprayer hose.

Also Read: Ways Replace a Kitchen Sink Faucet

Step 5: Place the Hose Back

If there is no problem, please regroup them together. Please follow the steps below:

  1. Connect the hose back to the head of the sprayer.
  2. For Type 1 and Type 2 faucets, pass the hose through the sprayer hole.
  3. For the pull-out style, pass the hose through the neck of the faucet.
  4. Make sure that the nozzle is fully put back in place.
  5. Reach and find the exit tube under the counter.
  6. Place the sprayer hose on the weight of the pull-out template.
  7. Connect the outlet tube to the sprayer hose.
  8. If it has a clip, you can protect it.
  9. To ensure safety, please pull the sprayer hose slightly.

Step 6: Test and Check

Once you understand that the delta faucet sprayer is quickly disconnected and replaced the faulty part with a new one, let us conduct a trial run on our small project. Here is what you will want to test whether everything is normal now:

  1. Open the shut-off valve located under the sink. You need to turn them counterclockwise to do this.
  2. See if the leaking problem of the sprayer hose is solved now.
  3. Turn on the faucet and press the trigger on the spray head.
  4. Check if the water is flowing out of the sprayer correctly.

Video Instructions

Source: YouTube

FAQs

How To Turn Off A Sink Sprayer?

To turn off the sink sprayer, you must first turn off the faucet. Apply oil to the valve button to make it slide. Then unscrew the sprayer hose to turn off the hot and cold water.

How To Remove A Quick Connector Sprayer?

To remove the quick connector sprayer, pull up the quick connector and hold the sprayer hose. Without disturbing the hose, hold the quick white connector with your fingers. Then pull down the quick connector at the same time and release the sprayer.

How To Remove A Stuck Faucet?

To remove the stuck faucet, you can use a hairdryer. Because the heat generated by the hairdryer will help loosen the metal. Then turn it with a wrench and take out the stuck faucet.

Final Thoughts

Know how to disconnect sprayer hose from delta faucet? Don’t let a leaking sprayer faucet annoy you another day when a simple fix can solve the problem. If your Delta faucet has a plug for the outlet pipe, leave it as it is and assemble only the faucet. If there is no plug, install the sprayer and coil it under the sink. You can completely trust my article to replace a malfunctioning sprayer hose. Read our other articles to learn more about kitchen plumbing.

Leave a Comment